Prüfungsteilnahme im Ausland

Sie können prinzipiell von überall an einer E-Examination@Home teilnehmen. Die wichtigste Bedingung ist, dass Sie über eine stabile Internetverbindung verfügen. Sie können die Stabilität der Verbindung und Übertragungsgeschwindigkeit zu dem Prüfungs-Servern unter Windows und macOS wie folgt selbst überprüfen: 

  1. Messung der Paketübermittlung
  2. Messung der Übertragungsgeschwindigkeit (Internet-Geschwindigkeit)

1) Messung der Paketübermittlung

Microsoft Windows 10
  • Öffnen Sie die Kommandozeile (ext. Link) und geben Sie folgenden Befehl ein:
  • ping 8.8.8.8
  • Es werden nun testweise 4 Pakete an die Adresse 8.8.8.8 (Google) verschickt. Bitte wiederholen Sie diesen Versuch mindestens 4 Mal.

macOS
  • Öffnen Sie das Terminal (ext. Link) und geben Sie folgenden Befehl ein:
  • ping -c 16 8.8.8.8
  • Es werden nun testweise 16 Pakete an die Adresse 8.8.8.8 (Google) verschickt.

Interpretation der Messergebnisse
  • Die Millisekunden geben die Paketgeschwindigkeiten an.
  • Alles unter 50ms sollte normalerweise zu keinen Problemen führen.
  • Wichtig: Sollten die Millisekunden stark schwanken ("+-100ms"), ist die Leitung wahrscheinlich nicht stabil genug.
  • Wichtig: Sollten Pakete verloren gehen ("packet loss" größer als 0.0%), ist Ihre Internet-Verbindung wahrscheinlich nicht stabil genug.


2) Messung der Internet-Geschwindigkeit

Schritt-für-Schritt-Anleitung

  • Öffnen Sie die folgende Webseite https://www.speedtest.net (ext. Link)
  • Wählen Sie unter "Change Server" bitte einen Server in Berlin

Klicken Sie auf "Go". Die Messung dauert ca. 2min

  • Up- und Download-Werte oberhalb von 10Mbps reichen für die Prüfungsdurchführung aus.
  • Weitere Empfehlungen finden Sie auch in der Checkliste unter: https://wikis.fu-berlin.de/x/HgS-Tg



Taking an exam from abroad

In principal you can take your exam via E-Examination@Home from everywhere. The only deciding factor is the availabiliy of a stable internet connection. You can check the stability and rate of transmission of your internet connection using Windows or macOS on your own:

  1. Checking packet switching
  2. Checking the rate of transmission (speed of your internet connection)

1) Checking packet switching

Microsoft Windows 10
  • Open the Command interpreter (ext. Link) and type in the prompt: ping 8.8.8.8
  • The command sends 4 packets to the adress 8.8.8.8 (Google) as a trial run. Repeat the command at least 4 times.

Apple macOS
  • Open Terminal (ext. Link) and type in the prompt: ping -c 16 8.8.8.8
  • The command sends 16 packets to the adress 8.8.8.8 (Google) as a trial run.

Interpretation of the results
  • The milliseconds show you the packet speed. Everything below 50 ms shouldn't cause problems during the exam. 
  • Important: if the milliseconds fluctuate a lot ("+-100ms"), the line is not stable enough.
  • Important: Should packets get lost ("packet loss" higher than 0.0%), your internet connection is not stable enough.

2) Checking the speed of your internet connection

Press "Go". The measurement takes about 2 min.

  • Up- and Download values above 10 Mbps are sufficient to take the exam from your location.
  • Other recommendations can be found in our checklist, provided here: https://wikis.fu-berlin.de/x/HgS-Tg
  • Keine Stichwörter